Customer Testimonials

Here are a selection of good words from satisfied customers.

From

Larry Klamecki
Sure, feel free to use my comments in the testimonials. I meant what I
said about the quality of your product and would repeat that to anyone.
Every time I push the Lola around the shop I admire your work.
You make a great product.
I love the stand so much that the new one will be to store my completely
restored Lola 440 FF so I can admire it, move it around the shop, etc.,

From Steve Madden of Wisconsin.

Doug,

    Finally. It's been a long time getting here (the car). Here are the pictures of the car in your lift as promised.

    I use it in my garage. I converted the third stall to a shop for the car. Using your lift, besides saving my back, makes the working space much more effective. With the car on the cart, I can get around it easily from all sides. And when not working on it, I can move it to a corner where it is out of the way. No worries about damage in a limited space.

    You are a blessing to racers who work on their cars at home. I'm sure glad I finally got the winch from you. The rate it operates at is just right. A one handed operation. And the speed is so controllable. No worry about damage to the car from any quick drops. And I hooked a jumper battery for the power source, as your friend in Indiana advised. Thanks for the tip.

    You'll notice how well the "sports racer" fits. Plenty of room. The car in the hoist is showing actual balance. Like I said, a one handed operation.

    Thanks again Doug. Like the rest of the testimonials. I don't think I really could of gotten along without it.

    God bless you my friend. And a Merry Christmas to you and your family.

Steve Madden new car with lift and stand

Here is a Lift and Stand in action for our customer K Lawrence of Tulsa OK Formula Continental race car.

From Happy Customers

By the way, your lift and stand is the best racing investment I've ever
made. It makes working on the car so much more enjoyable. I think I am
looking at things on the car much more closely with it up at a good working
level.
Thanks,
Craig

I got one of the Brenner lifts and stand--I can not say how happy I am with it. Engine and gearbox installation was a snap. Worth every penny I paid for it.
Barry Haynie

__________________

Doug and Marlane delivered my new Brenner Lift at Thunderhill on Friday, and I can now attest that working on the car took on a whole new level of comfort. Incredible ease of use and utility. Exceptional workmanship and service from Doug as well. Had it disassembled and in the trailer in under 5 minutes. Outstanding piece of work!!

Thanks Doug

__________________
Greg Mercurio
FF #37
_

Happy Customer

I have a Brenner lift and stand . They are fantastic. I can't believe I worked on cars all bent over or on my knees for so long!

Great products that are very well made.

Life is good!

Craig Jones

__________________

just purchased a Brenner car stand thought I would pass on some thoughts.
Quick and easy assembly. 6 inch caster wheels. Top of stand measures 18" tall and 18 inches wide....car moves around the shop with ease without concern off falling off. I tried the 18" wide stands as I wanted a compact package but will be returning one stand and getting a wider, I believe 36" wide 18 inch tall stand to allow greater stability, as I want to get in and out of the car while on the stand if necessary.
Car sits about 18 inches off the ground.
Nice product!
JC

From Bob Beasley Prospect, Kentucky

Douglas,
The lift is great. Attached are some pictures of my Formula Mazda. I recently completed my first regional race at Road Atlanta.
Thanks for the great product!
Bob

Doug,

It was nice to meet you and Marlane yesterday. Thanks for putting the lift
together so quickly for me. It was put into service immediately and is just great. Assembly is easy and the "T"frame posts are very easy to move around the car to get the lift into position.

Currently I have a limited space and the assembled lift needed to pass
around the rear of the car. This is possible with the T design but likely
would not have been feasible with an A Frame style.

Bill Dormandy
Danville CA

Doug:

I don't know what we would have done at the Second Creek Double National
without the Brenner Fabrication car stand to help us out. After a couple
mishaps, we had to rewire the car and replace a suspension corner "in the
field" on a dirt paddock, and the stand helped us get out of the mud and
back to work.

The stand has a permanent spot in our trailer. Thanks for making a great
product that makes a racer's life easier!

Travis Mason-Bushman
Public Relations Manager/Mechanic
GP Motorsports #49 F2000

From Darrell Benner Fremont CA
One item that you should look at is the set of stands and portable lift made by Doug Brenner. I started using this setup and I have to say I wonder how I ever got by without it before! The lift is very easy to put up and take down and can be hauled or stored in very little space. The stand with 4 swivel/lockable casters lets you move the car with one hand and work on it at a height that won't strain your back! It's a tool every racer should have!

From Park Payne Detroit

Received the lift and I love it. It survived the transportation to the Detroit area without a scratch and works wonderfully. This is by far a much better approach to working on a car like this in your garage. serif No need to move things around to get the floor jacks under the car, just lift it up and roll where you want it. I can't wait to try it at the track. The stand is the next important factor. When I'm working on the car at home it will simplify the workload and make the car more assessable. In addition I can move it around in the garage. Thanks again and talk to you again soon, Park

Douglas,

I received your lift yesterday afternoon. You were right, it takes only a minute to assemble. I am also very impressed with your craftsmanship. Your welding is beautiful, also no burrs or sharp edges, very well done.

Thanks again Douglas!

Best regards,

Jim

from Jim List Minneapolis MN